Peavey Feedback Ferret D Overview
The Feedback Ferret D from Peavey is a special stereo processor that locates and suppresses frequencies that are feeding back in a sound system. When plugged in between the main outputs of a mixer and the power amplifier of a PA system, 16 digital filters analyze the audio for offending feedback frequencies. Custom algorithms help the Feedback Ferret D distinguish between music and feedback loops. When feedback is detected, the troublesome frequencies are instantly suppressed without interrupting the program material.
The Feedback Ferret D can be used time and time again without the need to adjust its parameters, making it a great "set-and-forget" problem solver for sound installations. It can operate in dual channel stereo mode, or in dual mono mode to fight feedback in two separate audio chains. A "defeat" switch on the rear panel locks the controls on the front panel. The Feedback Ferret D can also be set up to recall the last settings used, or revert back to preset 1 on power up. You can save 4 different presets.
Peavey Feedback Ferret D Specs
Filter Type | 16 digital dynamically-controlled notch filters (32 in dual mono mode) |
Frequency Bands | 1/12 octave |
Number of Channels | 2 |
Inputs | 2 x Balanced Combo XLR 1/4" TRS |
Input Level | +4 dBu |
Maximum Input Level | Input Sensitivity: +4 dBu nominal +18 dBu full scale |
Outputs | 2 x Balanced XLR 2 x Balanced TRS |
Output Level | +4 dBu |
Maximum Output Level | Output Drive: +4 dBu nominal +18 dBu full scale |
Converters | 24-bit |
Sample Rate | 48 kHz |
Frequency Response | +/- 0.5 dB (20 Hz to 20 kHz, ref. 1 kHz) |
Dynamic Range | 103 dBr @ 1 kHz ref to +18 dBu Output 22 Hz to 22 kHz unweighted |
# Of Rack Space | 1U (one rack space) |
Power | 120VAC, 60 Hz, 25 Watts |
Dimensions (WxDxH) | 19 x 8 x 1.75" (48.26 x 20.32 x 4.45cm) |
Weight | 7.1 lbs (3.95 kg) |