The Pickup Booster allows you boost your signal without altering the character of your sound while also allowing you to access different pickup tones with the flip of the Resonance Switch. With its class A, low-noise circuit design the Pickup Booster is exceptional at emphasizing a guitar's natural tone while adding some muscle and fatness. It's extremely transparent, adds clarity and has several new improvements that build even further on the original's success. The Gain control can now be turned down to unity (0dB). We also added a discrete push-pull output stage that gives you increased drive capability. So even with the Gain knob down at 0dB and a long cable length, your signal chain will sound cleaner.
The Resonance Switch makes the pedal interact directly with your pickups, allowing those with single-coils to flip a switch for a vintage humbucker sound that's perfect for classic rock or blues. With another flip of the switch you can get a high-output humbucker tone for rip roaring solos or for blasting gain out of a tube amp. You can use the Pickup Booster for a clean, buffered boost with more headroom or you can fatten up a humbucker for maximum saturation and sustain. Like the Dirty Deed, Vapor Trail and 805 Overdrive, each Pickup Booster is assembled in Santa Barbara, California and is True-Bypass.
Clean, buffered boost
|Fattened Strat |
Setting the Resonance Switch to the "1" position will shift
the resonant peak of a single-coil pickup down,
thickening up your tone. Putting the Gain control up to
the 12 o'clock position will let you drive the front-end of the amp for more grit. This setting really lets the intensity of your playing come through, staying clean until you dig in and bring out the sweet harmonics of your amp.
|Fattened Humbucker |
This setting, with the Resonance Switch on "0" and the Gain control all the way up, gives maximum saturation and sustain to a humbucker.
Type of circuitry: Fully discrete, Class A
Gain range: 0 to 25 dB
Bypass: True bypass
Pickup Resonance Switch: Makes a single coil pickup sound like a vintage humbucker ("1") or high output humbucker ("2").
Frequency Response: -3dB at 30Hz and 38 kHz
Distortion: < 0.02% at 200mV RMS output
Noise: -120 dBV (referred to input with gain set at 25dB)
Input impedance: 250K Ohms (when effect is "on")
Output impedance: 150 Ohms
Power: 9V battery or external 9 to 18V Regulated DC Adapter (center negative)
Current consumption: 4.5mA @ 9V (when LED is "on"), 3mA @ 9V (when LED is "off"). Currents at 18V are 11mA and 8mA, respectively.
Dimensions: 2.61" X 4.90" X 1.45"
Weight: 0.8lb. without battery
The Seymour Duncan Pickup Booster allows you boost your signal without altering the character of your sound while also allowing you to access different pickup tones. At the flip of a switch you can get a blues rock vintage humbucker tone or a hard rock hot humbucker sound on any single-coil equipped guitar. It can provide more headroom and saturation for any humbucker equipped guitar while keeping the tone clear and natural thanks to the class A, low-noise circuit design. More info on the Pickup Booster pedal here: http://www.seymourduncan.com/pedals/pickup_booster/ Gear Used in Demo: Epiphone with Slash Pickup Set Vox with SSL-1 neck, SSL-5 bridge Marshall DSL401 Music by Danny Young: http://www.guitarbody.co.uk
Pickup BoosterThe Seymour Duncan Pickup Booster allows you boost your signal...